GibbsCAM MTM Training – Level 1

Dual Spindle, Single Turret Fundamentals

🔍 Overview

This instructor-led, hands-on course introduces the fundamentals of Multi-Task Machining (MTM) in GibbsCAM, with a focus on dual-spindle, single-turret machine configurations. Designed for programmers new to MTM or those transitioning from traditional mill/turn programming, the course provides a structured foundation in machine setup, basic programming, part transfer, and simulation.

Delivered over two 4-hour sessions, the format allows participants to build confidence through guided instruction, hands-on practice, and time to reinforce concepts between sessions.

🎯 Learning Objectives

By the end of this course, participants will be able to:

- Understand the fundamentals of MTM programming in GibbsCAM.
- Configure a dual-spindle, single-turret machine environment.
- Create basic turning and milling operations.
- Perform a part transfer from the main spindle to the sub spindle.
- Utilize utility operations required for MTM programming.
- Simulate and verify the complete machining process.
- Troubleshoot common programming and simulation issues.

Session 1 – MTM Fundamentals & Machine Setup (4 Hours)

Introduction to MTM & GibbsCAM Workflow

- What is Multi-Task Machining (MTM)?
- MTM machine configurations and terminology.
- Workflow from part import to finished program.
- Review of sample MTM projects.

Machine & Part Setup

- Defining a dual-spindle, single-turret machine configuration in DCD.
- Understanding machine components.
- Tooling fundamentals:
- Fixed tools
- Live tools
- Tool blocks and holders
- Importing and preparing part geometry.

Basic Programming

- Programming turning operations on the main spindle.
- Programming milling operations.
- Tool ordering and operation management.
- Preparing the part for transfer.

🛠 Hands-On Exercises

- Configure an MTM machine.
- Build a basic tooling setup.
- Import and prepare a part.
- Program basic turning operations.
- Program basic milling operations.

Session 2 – Part Transfer, Simulation & Verification (4 Hours)

Review & Questions

- Review key concepts from Session 1.
- Answer participant questions.
- Verify machine and project setup.

Part Transfer

- Main spindle to sub spindle transfer process.
- Creating transfer operations.
- Sub Spindle In.
- Part Shift.
- Return operations.
- Best practices for successful transfers.

Basic Programming

- Programming turning operations on the sub spindle.
- Programming milling operations on the sub spindle.
- Tool ordering and operation management.
- Preparing the part for transfer.

Simulation & Verification

- Using Operation Simulation.
- Cut Part Rendering.
- Machine verification.
- Identifying and correcting programming issues.
- Troubleshooting common simulation errors.

Workflow Review & Best Practices

- Programming tips and workflow organization.
- Common mistakes to avoid.
- Final review and discussion.

🛠 Hands-On Exercises

- Complete a part transfer.
- Create required utility operations.
- Simulate the complete machining process.
- Verify the finished program.
- Troubleshoot common issues.

📋 Course Information

Duration: Two 4-hour instructor-led sessions (8 hours total)

Dates: August 25th and August 27th from 8am-12pm (central)

Prerequisites: Basic GibbsCAM experience (Mill/Turn recommended)

Format: Online instructor-led training with live demonstrations, guided exercises, and hands-on programming.

Who Should Attend: GibbsCAM users who are new to Multi-Task Machining or are looking to build a solid foundation before moving into more advanced MTM programming techniques.

GibbsCAM MTM Training Level 1 -- Dual Spindle, Single Turret Fundamentals